R5906112 /09 UDX series 1438.12.3 Connection possibilitiesAt this moment, the only inputs supporting 3D on the Pulse input boards are the DisplayPort inputsand HDMI input. More inputs may support 3D in a future release.Connecting with the quad combo input cardThere is only one way of projecting Active stereoscopic 3D with the Combo input card, using the followingsetup:• Source: Active Stereo (sequential L/R)• Layout mode: Standard layout (1x1 layout)• Video Timing: 2560 x 1600 (WQXGA) @120 Hz• Color depth: 30 bpp• Connector: DisplayPort 1.2 or HDMIConnecting with the quad DP 1.2 Input cardYou can use one of the following methods. The resulting image will always be an Active Stereo image.Source Layout mode Video Timing /cableFixedconfiguration? Color depthActive Stereo(sequential L/R)Standard layout (1x1layout)2560 x 1600 @120Hz30 bppActive Stereo(sequential L/R)4 Column mode (4x1layout)960 x 2160 @120 Hz 30 bppActive Stereo(sequential L/R)4 Quadrant mode(2x2 layout)1920 x 1080 @120Hz30 bppPassive Stereo(separate L/R)Standard layout (1x1layout)3840 x 2160 @60 Hz • Cable 1: left eye• Cable 2: right eye30 bppPassive Stereo (dualpipe L/R)2 Column mode (2x1layout)1920 x 2160 @60 Hz • Cable 1: left eye,left column• Cable 2: left eye,right column• Cable 3: righteye, left column• Cable 4: righteye, right column30 bppGUI – Installation
