R5906112 /09 UDX series1489.1 Saving the current projector settings in aprofileWhich settings can be saved to a profile?Profile settingname Settings savedSource Active source selectionImage • All basic image settings: contrast, brightness, saturations, sharpness & gamma• Used gamma type• Digital Zoom (width / height / factor)• Digital shift (x/y)• Output resolutionPQ Screen luminance & HDR boost valueP7 Realcolor Color mode & coordinatesInstallation • Lens parameters (lens zoom, focus & shift)• Position of motorized frame (if used).• Shutter status (open or closed).• Orientation (mounting & projection)• Scaling modeWarp • Warp status enabled / disabled• Screen size• Warp file selected• Transport DelayNote: Bow and 4Corners warp cannot be saved.Blend • Blend mask enabled / disabled• All Masks (top / bottom / left / right) and heights (top / bottom / left / right)• Blend files enabled / disabled• Blend file selectedBlack level • Black level file enabled / disabled• Black Level file selected• Basic black level enabled / disabled• Black level settings (top / bottom / left / right)RGB Adjustment Red, Green and Blue valuesIllumination • Power setting• CLO enabled / disabled• CLO set pointCooling7 Selected Cooling mode3D setup • Display mode used• Swap eyes on / off• Swap frame pair on / off• Dark time and sync delay valuesHow to save the current projector profile to a macro?1. In the main menu, select Profiles → New.GUI – Macro’s and projector profiles7: Only if external cooler is installed
