R5906112 /09 UDX series 694.5.1 Controlling the projectorWhy a projector address?As more than one projector can be installed in a room, each projector should be separately addressable withan RCU or computer. Therefore each projector has its own address.Set up an individual Projector AddressThe set up of a projector address can be done via the software.Projector controllingWhen the address is set, the projector can be controlled now:• with the RCU: only for addresses between 1 and 31.Broadcast AddressEvery projector has a broadcast (common) address '0' or '1'. The default address is '0'.The choice between '0' and '1' can be selected in the GUI: “System Settings” → “Communication” →“IR Control“.Placing new batteries in the remote control or plugging the remote to a projector via a cable willautomatically reset the address back to its default value '0'.Getting Started
