R5906112 /09 UDX series17210.9 Disabling Standby modeWhen to disable standby modeUntil recently, it was not possible to navigate through the on-screen display (OSD) of the projector while inReady mode. This feature has been implemented from software version 1.7 onward.However, by default the projector will automatically go to standby mode after 15 minutes as a power-savingfunctionality. While in Standby mode, it is no longer possible to use the OSD for anything other than a statusoverview. In order to prevent the projector from transitioning to this power-saving mode, you can now disableStandby mode.How to disable/enable standby mode1. In the main menu, select System Settings.2. In the System Settings menu, select if you want to enable or disable Standby mode by using the sliderunderneath Standby.Image 10-30: System Settings Menu, Enable Standby modeGUI – System Settings
