R5906112 /09 UDX series 856.3 Connector SettingsAbout Connector SettingsThe Connector Settings menu allows you to change settings for each input connector of the projector.By default all options for every connector are set to automatic, together with the native Extended DisplayIdentification Data (EDID).When entering the menu for each input connector, you can change the following:• Color Space• Signal Range• EDIDHow to configure a connector1. Press Menu to activate the menus and select Source.Image 6-6: Select Source2. Press OK.The Select Source menu is displayed with the actual available sources filled out.3. Scroll down to the bottom of the list of available sources and select Connector Settings.Image 6-7: Source menu, Connector SettingsThe available input connectors are displayed.Image 6-8: Select source4. Select the desired connector.The Connector Settings menu for this connector will be displayed.GUI – Source
