R5906112 /09 UDX series805.3 Test PatternsHow to use test patterns1. In the main menu, select Test Patterns.orPush the Test Patterns button on the RC.Image 5-5: Main menu, Test Patterns2. In the Test Patterns menu, select either Internal, or Output test patterns.3. In the chosen submenu, select the desired test pattern from the list.You can select one of the following Internal test patterns:• Color bars• Checker board• Blue / Green / Red / White• Convergence• Focus• Aspect• Scheimpflug White / Green• Cross hatch• Monoscope• 3D StereoYou can select one of the following Output test patterns:• Blemish zone• Checkerboard• Color bars• Convergence• FIP• Full screen black / white / blue / green / red / cyan / magenta / yellow• Grid• Horizontal Ramp• Vertical Ramp• MTF4. To turn the test pattern off, return to the previous menu.Graphic User Interface (GUI)
