R5906112 /09 UDX series523.7 Input source connections – SFP Input BoardThe Barco SFP Input Board has been designed and tested to work alongside the Barco SFP OutputBoard.However, it is possible that the SFP Input board can also work with other third-party devices thatsupport 12G over fiber. Due to the many third-party options available on the market, the input boardcould not be tested for every option available.SFP input boardTo connect 12G SDI over fiber.The input board is delivered without any connector. It is up to the customer to buy the necessary connectors,transceivers and cables. These parts can be mounted on the indicated places on the front panel of the board.SELSYNCOpt A Opt B SFP A SFP BSELSYNC1 2 3Image 3-101 Neutrik Duo optical connector or Neutrik Quad optical connector2 Neutrik Duo optical connector or Neutrik Quad optical connector3 2x12G SDI/10GE transceiverInput specificationsFor readability, the video timings listed are summarized. For the full list of video timings, refer to theappendices.Color space YCbCrColor depth 10 bpcChroma sampling 4:2:2Audio support not supportedVideo timingsprogressive5Type Port type FormatHD-SDI Single link • Up to 1920 x 1080 @24 Hz• Up to 1920 x 1080 @25 Hz• Up to 1920 x 1080 @30 Hz• Up to 1280 x 720 @50 Hz• Up to 1280 x 720 @60 Hz• Up to 1280 x 720 @24 Hz• Up to 1280 x 720 @30 Hz• Up to 1280 x 720 @25 Hz3G-SDI Single link 1920 x 1080 @50 Hz and @60 Hz1920 x 1200 @50 Hz, @59.94 Hz and@60 Hz.2048 x 1080 @50 Hz and @60 HzInput & Communication5: For the full list of video timings, see Appendix
