R5906112 /09 UDX series16810.5 Front XLR output voltage controlWhat can be done?The output voltage on the front XLR connector can be enabled or disabled. If enabled, the output voltage levelcan be set to 0 V, 12 V or 24V.The output voltage depends on the application or peripheral used. For example, the optional externalmechanical shutter requires 12 V. The motorized rigging frame on the other end requires 24 V.DMX Art-Net can also enable the output voltage on the front XLR connector. To avoid that per accident avoltage is activated via DMX Art-Net, set the power level to 0 V.Location of the XLR connector1Image 10-22: Location of the XLR connector on the UDXHow to enable or disable?1. In the main menu, select System Settings → Communication → DMX.Image 10-23: Communication menu, DMXThe DMX menu is displayed.Image 10-24: DMX menu2. On the bottom of the DMX menu, Enable the XLR connector.3. Select the desired Output Voltage.GUI – System Settings
