R5906112 /09 UDX series 573.9 Removal of an input boardWARNING: The procedures below may only be performed by Barco trained and qualifiedtechnicians.CAUTION: Always wear a wrist band which is connected to the ground while handling theelectrostatic discharge (ESD) sensitive parts.The procedure below is applicable to all the input modules of the Input & Communication Unit of theprojector.How to remove1. Switch off the projector and unplug the power cord at the projector back side.2. Release the 3 captive screws of the input module (4).444Image 3-153. Pull out the input module of the Input & Communication using the handles.Input & Communication
