R5906112 /09 UDX series1448.12.4 Choosing the desired Display SetupOutput modesThe following output modes are available:• AutoStereo: Automatic mode (2D input = 2D output, 3D input = Active Stereo output).• Mono: Forces all source signals to 2D output.• ActiveStereo: Forces all source signals to Active Stereoscopic 3D.Use the following table as an indicator of what display mode you require.Source signal AutoStereo Mono ActiveStereo2D Source Output is a 2D image Output is a 2D image Output is in Active StereoActive Stereo source Output is in Active Stereo Output is a 2D image Output is in Active StereoPassive Stereo source Output is in Active Stereo Output is a 2D image Output is in Active StereoWhen a different Display Mode is chosen compared to the source signal (e.g. Active Stereo sourcewith Mono output), advanced image processing will make sure you a desirable image will bedisplayed.How to select the desired projection method?1. In the main menu, select Installation → Display Setup.Image 8-72: Installation menu, Display setupThe Display setup menu is displayed.Image 8-73: Display setup menu2. Select the desired Display Mode:• AutoStereo (default value)• Mono• ActiveSteroGUI – Installation
