Restraint System CheckChecking the Restraint SystemsSafety BeltsNow and then, check that the safety belt reminder light,safety belts, buckles, latch plates, retractors, andanchorages are all working properly.Look for any other loose or damaged safety belt systemparts that might keep a safety belt system from doingits job. See your dealer/retailer to have it repaired. Tornor frayed safety belts may not protect you in a crash.They can rip apart under impact forces. If a belt is tornor frayed, get a new one right away.Make sure the safety belt reminder light is working.See Safety Belt Reminders on page 4-49 for moreinformation.Keep safety belts clean and dry. See Care of SafetyBelts on page 6-95.AirbagsThe airbag system does not need regularly scheduledmaintenance or replacement. Make sure the airbagreadiness light is working. See Airbag Readiness Lighton page 4-50 for more information.Notice: If an airbag covering is damaged, opened,or broken, the airbag may not work properly. Donot open or break the airbag coverings. If there areany opened or broken airbag covers, have theairbag covering and/or airbag module replaced.For the location of the airbag modules, see WhatMakes an Airbag Inflate? on page 2-65. See yourdealer/retailer for service.2-74
