ALL (default): The driver’s seat and the steering wheeltilt and steering column telescope features will recall,if your vehicle has this option.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.MEMORY SEAT RECALLIf your vehicle has this feature, it allows you to selectyour preference for the remote memory seat recallfeature. See Memory Seat, Mirrors and Steering Wheelon page 2-6 for more information.Press the customization button until MEMORY SEATRECALL appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:OFF (default): No remote memory seat recall will occur.ON: The driver’s seat and outside mirrors willautomatically move to the stored driving position whenthe unlock button on the Remote Keyless Entry(RKE) transmitter is pressed. The steering column willalso move on vehicles with the power tilt and telescopicsteering feature. See Power Tilt Wheel and TelescopicSteering Column on page 4-4 for more information.See “RELEARN REMOTE KEY” under DIC Operationand Displays on page 4-62 for more information onmatching transmitters to driver ID numbers.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.REMOTE STARTIf your vehicle has this feature, it allows you to turn theremote start off or on. The remote start feature allowsyou to start the engine from outside of the vehicle usingthe Remote Keyless Entry (RKE) transmitter. SeeRemote Vehicle Start on page 3-7 for more information.Press the customization button until REMOTE STARTappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Then pressthe menu up/down button to scroll through the followingsettings:OFF: The remote start feature will be disabled.ON (default): The remote start feature will be enabled.NO CHANGE: No change will be made to thisfeature. The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.4-87
