Manual Operation9 (Off): Turns the entire climate control system off.Outside air still enters the vehicle and is directed to thefloor. The airflow direction and temperature can beadjusted, as indicated below.If the temperature is adjusted while the system is off,the display will light to show the current settings.w x (Driver’s Temperature Controls): Press the upor down buttons next to the fan control to manuallyincrease or decrease the temperature inside the vehicle.w x (Passenger’s Temperature Controls): Pressthe up or down buttons next to the air deliverymode control to manually increase or decrease thetemperature for the front passenger. If the passengerclimate control system is off, pressing one of thesebuttons turns it on.9 (Fan Control): Turn clockwise or counterclockwiseto increase or decrease the fan speed. Turning thiscontrol completely counterclockwise will turn onthe automatic fan operation. If the airflow seems lowwhen the fan speed is at the highest setting, thepassenger compartment air filter may need to bereplaced. See Passenger Compartment Air Filter onpage 4-44.Air Delivery Mode Control: Turn clockwise orcounterclockwise to change the current airflow mode.Select one of the following:AUTO: Turns on the automatic delivery mode operation.F (Vent): Air is directed to the instrument paneloutlets.* (Bi-Level): Air is divided between the instrumentpanel and the floor outlets. In automatic operation,cooler air is directed to the upper outlets and warmer airto the floor outlets.7 (Floor): Air is directed to the floor outlets with someair directed to the side window outlets and thewindshield.If recirculation is selected, it only stays on for threeminutes to reduce windshield fogging.W (Floor/Defog): This mode clears the windows offog or moisture. Air is directed to the floor outlets, withsome air going to the side window outlets andwindshield. When selected, the system turns offrecirculation and runs the air conditioning compressorunless the outside temperature is at or below freezing.The recirculation mode cannot be selected while inthe floor/defog mode.4-38