Programming Transmitters to theVehicleOnly RKE transmitters programmed to the vehicle willwork. If a transmitter is lost or stolen, a replacement canbe purchased and programmed through yourdealer/retailer. When the replacement transmitter isprogrammed to the vehicle, all remaining transmittersmust also be programmed. Any lost or stolentransmitters no longer work once the new transmitter isprogrammed. Each vehicle can have up to eighttransmitters programmed to it. See RELEARN REMOTEKEY under DIC Operation and Displays on page 4-62.Battery ReplacementReplace the battery if the REPLACE BATTERY INREMOTE KEY message displays in the DIC. See“REPLACE BATTERY IN REMOTE KEY” under DICWarnings and Messages on page 4-67 for additionalinformation.Notice: When replacing the battery, do not touchany of the circuitry on the transmitter. Staticfrom your body could damage the transmitter.To replace the battery:1. Separate the transmitter with a flat, thin objectinserted into the notch, located above themetal base.2. Remove the old battery. Do not use a metal object.3. Insert the new battery, positive side facing up.Replace with a CR2032 or equivalent battery.4. Reassemble the transmitter.3-6
