Notice: If the jumper cables are connected orremoved in the wrong order, electrical shorting mayoccur and damage the vehicle. The repairs wouldnot be covered by the vehicle warranty. Alwaysconnect and remove the jumper cables in the correctorder, making sure that the cables do not toucheach other or other metal.A. Heavy, Unpainted Metal Engine Part or RemoteNegative (−) Terminal (GND)B. Good Battery or Remote Positive (+) and RemoteNegative (−) TerminalsC. Dead Battery or Remote Positive (+) TerminalTo disconnect the jumper cables from both vehicles, dothe following:1. Disconnect the black negative (−) cable from thevehicle that had the dead battery.2. Disconnect the black negative (−) cable from thevehicle with the good battery.3. Disconnect the red positive (+) cable from thevehicle with the good battery.4. Disconnect the red positive (+) cable from the othervehicle.5. Return the remote positive (+) terminal cover to itsoriginal position.Headlamp AimingThe vehicle has a visual optical headlamp aimingsystem. The aim has been preset at the factory andshould need no further adjustment.However, if the vehicle is damaged in a crash, theheadlamp aim may be affected and adjustment may benecessary.If oncoming vehicles flash their high beams at you, thismay also mean the vertical aim needs to be adjusted.Jumper Cable Removal6-40