Black plate (47,1)Cadillac CTS Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-6081492) - 2014 - CRC 1st Edition - 7/2/13Seats and Restraints 3-47{ WarningDo not attach more than one childrestraint to a single anchor.Attaching more than one childrestraint to a single anchor couldcause the anchor or attachmentto come loose or even breakduring a crash. A child or otherscould be injured. To reduce therisk of serious or fatal injuriesduring a crash, attach only onechild restraint per anchor.{ WarningChildren can be seriously injuredor strangled if a shoulder belt iswrapped around their neck andthe safety belt continues totighten. Buckle any unused safetybelts behind the child restraint sochildren cannot reach them. Pullthe shoulder belt all the way out(Continued)Warning (Continued)of the retractor to set the lock,if the vehicle has one, after thechild restraint has been installed.{ CautionDo not let the LATCHattachments rub against thevehicle’s safety belts. This maydamage these parts. If necessary,move buckled safety belts toavoid rubbing the LATCHattachments.Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.If you need to secure more than onechild restraint in the rear seat, seeWhere to Put the Restraint onpage 3-42.This system is designed to makethe installation of child restraintseasier. When using lower anchors,do not use the vehicle's safety belts.Instead, use the vehicle's anchorsand child restraint attachments tosecure the restraints. Somerestraints also use another vehicleanchor to secure a top tether.1. Attach and tighten the lowerattachments to the loweranchors. If the child restraintdoes not have lowerattachments or the desiredseating position does not havelower anchors, secure the childrestraint with the top tether andthe safety belts. Refer to yourchild restraint manufacturerinstructions and the instructionsin this manual.