Black plate (16,1)Cadillac CTS Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-6081492) - 2014 - CRC 1st Edition - 7/2/139-16 Driving and Operating. Do not participate in trackevents, sport driving schools,or similar activities during thisbreak-in period.. Check engine oil with everyrefueling and add if necessary.Oil and fuel consumption may behigher than normal during thefirst 2 414 km (1,500 mi).. To break in new tires, drive atmoderate speeds and avoid hardcornering for the first322 km (200 mi). New tires donot have maximum traction andmay tend to slip.. New brake linings also need abreak–in period. Avoid makinghard stops during the first322 km (200 mi). This isrecommended every time brakelinings are replaced.Ignition PositionsThe vehicle has an electronickeyless ignition with pushbuttonstart.Pressing the button cycles it throughthree modes: ACC/ACCESSORY,ON/RUN/START, and Stopping theEngine/OFF.The Remote Keyless Entry (RKE)transmitter must be in the vehicle forthe system to operate. If thepushbutton start is not working, thevehicle may be near a strong radioantenna signal causing interferenceto the Keyless Access system. SeeRemote Keyless Entry (RKE)System Operation on page 2-2.To shift out of P (Park), the vehiclemust be in ACC/ACCESSORY orON/RUN, and the brake pedal mustbe applied.Stopping the Engine/OFF (NoIndicator Lights): When thevehicle is stopped, press theENGINE START/STOP button onceto turn the engine off.If the vehicle is in P (Park), theignition will turn off, and RetainedAccessory Power (RAP) will remainactive. See Retained AccessoryPower (RAP) on page 9-19.If the vehicle is not in P (Park), theignition will return to ACC/ACCESSORY and display amessage in the Driver InformationCenter (DIC). See TransmissionMessages on page 5-47. When thevehicle is shifted into P (Park), theignition system will switch to OFF.