Changing the Copy (Zoom) Ratio3-163Basic Copying and Mail Box FeaturesNOTEā¢ If the original is placed on the platen glass, the zoom ratio automatically appears when thefeeder/platen cover is closed, provided that the original size can be detected.ā¢ If the original is placed in the feeder, the zoom ratio appears when is pressed.Entire ImageIf you are copying an original with an image that extends all the way to the edges onto the samesize paper at a copy ratio of 100%, the periphery of the original image may be cut off slightly onthe copy. However, if you set the Entire Image mode, the image is slightly reduced so that theentire image is copied without being cut off.The Entire Image mode should also be set when you want to copy A3 originals onto paperlarger than A3 to ensure that the edges of the originals are not cut off. Make sure to place theoriginals on the platen glass, and load the stack bypass with 305 mm x 457 mm or 320 mm x450 mm (SRA3) paper. (See Chapter 2, "Basic Operations," in the Reference Guide and "PaperSelection," on p. 1-12.)NOTEā¢ The Entire Image mode is available for the Copy function only.ā¢ The reduction ratios when the Entire Image mode is specified are:- A3: 98.1% (A3+ : 100%)- A4: 97.3%- A5: 96.2%ā¢ To cancel this setting, press [Copy Ratio]ā [Entire Image].1 Place your originals ā press [Copy Ratio].If necessary, see the screen shot in step 1 of "Copying" in "Preset Zoom," on p. 3-10.
