Tab Paper Creation4-764Special Copying and Mail Box FeaturesNOTEā¢ For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the ReferenceGuide.ā¢ When making copies or printing on tab paper, check that the position of the tabs is correct.ā¢ For instructions on loading tab paper in the stack bypass, see Chapter 2, "Basic Operations," in theReference Guide.ā¢ Images in the area which is to be shifted, but not within the tab area, may cause the copies to haveblack streaks or appear as dirty.ā¢ To cancel this setting, press [Special Features]ā [Tab Paper Creation]ā [Cancel].Copying1 Load the tab paper into the stack bypass.Make sure that the height of the paper stack does not exceed the loading limit mark ( ).IMPORTANTMake sure that the tab paper is loaded in the stack bypass in the following way:- The side to be printed on is placed face up.- The first sheet of tab paper to be printed on is placed on the top.- The tab (protruding part of the paper) is placed on the right side.2 Place your originals ā press [Special Features] ā [Tab PaperCreation].ABCExample: Images may be copied onto other parts of the tab paper.Area to be ShiftedABC
