Adjusting the Image4-804Special Copying and Mail Box FeaturesPrevent BleedingThis mode enables you to prevent the original image on the reverse side of thin originals fromappearing on the recorded pages or the copies.■ Copying1 Place your originals ➞ press [Special Features] ➞ [Image Adjustment].2 Press [Image Qual. Adjustment].3 Press [Prevent Bleed-thru] ➞ [OK].If you want to make fine adjustments to the density, press [Fine Adjustment] ➞ press [-] or [+] tospecify the amount of bleeding that you want to prevent ➞ press [OK].Details of each item are shown below.NOTEIf you make fine adjustments to the density, the automatic copy exposure setting is cancelled,and the original is scanned according to the Fine Adjustment settings.[-]: This setting prevents dark areas on the reverse side of the original from appearing on therecorded pages or the copies, but light areas on the front side may not be scanned/copiedeither.[+]: This setting may not be able to completely prevent dark areas on the reverse side of theoriginal from appearing on the recorded pages or the copies, but light areas on the frontside of the original are always scanned/copied.
