Two-Sided Copying/Printing3-503Basic Copying and Mail Box Features2 to 1-SidedThis feature automatically turns over two-sided originals placed in the feeder to make one-sidedcopies on different sheets of paper.IMPORTANTMake sure to place originals with a horizontal (landscape) orientation, such as A4R and A5R,horizontally. If these originals are placed vertically, the back side of the copy is printed upside down.NOTE• The 2 1-Sided mode is available for the Copying function only.• If you want to place your two-sided original on the platen glass, use the Job Build mode in SpecialFeatures to execute 2 1-Sided copying. (See "Job Build," on p. 4-53.)1 Place your originals in the feeder ➞ press [2-Sided].If necessary, see the screen shot in step 1 of "Copying" in "1 to 2-Sided," on p. 3-46.NOTEIf Auto Collate in Copy Settings (from the Additional Functions screen) is set to 'On', the Collateor Offset Collate mode is automatically set when you place your originals in the feeder. (See"Auto Collate," on p. 8-9.)2 Press [2 1-Sided].To set the orientation of the originals, press [Option] ➞ select the orientation of the originals ➞press [Done].Details of each item are shown below.[Book Type]: The front and back sides of the original have the same top-bottomorientation.[Calendar Type]: The front and back sides of the original have opposite top-bottomorientations.Originals Copies
