Using Image Creation Modes4-744Special Copying and Mail Box Features4 Select [Framing] or [Blanking].Details of each item are shown below.NOTE• To continue designating other areas, press an area key➞ repeat step 3.• To redesignate an area, select the area by pressing the appropriate area key.• To clear a designated area, select the area by pressing the appropriate area key➞ press [ClearArea].• If you want to use different settings for different areas, select the area by pressing theappropriate area key➞ select [Framing] or [Blanking].5 Press [Next] ➞ select [Shift center] or [Do not shift center].If only [Blanking] is selected, this step is unnecessary. Skip to step 6.NOTE• If the Center Shift mode is already specified beforehand, the Center Shift Settings screen doesnot appear.• Center Shift settings specified within the Area Designation mode are deleted when the areasettings are cancelled.6 Press [OK].■ Mail Box (Scan)1 Select the desired User Inbox number ➞ place your originals ➞ press[Scan] ➞ [Special Features] ➞ [Area Designation] ➞ [Numeric KeyEntry].2 Specify the Area Designation settings in accordance with steps 3 to 6of "Copying," on p. 4-73.[Framing]: Copy only the contents of the designated area while discarding the rest of theoriginal.[Blanking]: Copy the original by blanking out the contents of the designated area.
