Booklet Mode 4-254Special Copying and Mail Box Features4 Select whether to saddle stitch the booklet ➞ press [OK].● If [Divided Booklet] is selected:❑ Specify the number of sheets that you want to divide by using [-] and [+] ➞ press [OK].● If the printing position of the image is out of place, and you want to set thecreep (displacement) correction:❑ Press [Creep Correction] ➞ select [Auto] or [Manual] ➞ press [OK] ➞ [OK].If you select [Manual], press [▼] or [▲] to adjust the correction width.IMPORTANTThe maximum number of sheets, including cover sheets, that can be saddle stitched is:- 15 sheets: (64 to 80 g/m2)- 10 sheets: (81 to 105 g/m2)NOTE• If the number of sheets is 16 or more, the booklet is not saddle stitched.• The number of saddle stitched booklets that the booklet tray can hold depends on the number ofsheets that each booklet contains.- 1 to 5 sheets: 25 sets- 6 to 10 sheets: 15 sets- 11 to 15 sheets: 10 sets• If you selected [Add Cover], the maximum number of sets that the booklet tray can hold is 10.• Saddle stitching is not performed if there is only one sheet of output.• If you set the Booklet mode, the Center Shift mode is also automatically set.5 Set the Booklet Tray guide to match the paper size.A3/305 mm x 457 mm A4R
