Book/Page Edit/Shift Settings7-507Using the Express Copy Basic Features Screen2 Select the desired paper insertion feature ([Sheet Insertion], [ChapterPage], or [Tab Paper]) ➞ press [Add].You cannot select [Sheet Insertion] and [Chapter Page] at the same time.To check/change a specific setting, press [▼] or [▲] to scroll to the desired page ➞ select thepage ➞ press [Edit].To erase a specific setting, press [▼] or [▲] to scroll to the desired page ➞ select the page ➞press [Erase].If you select [Tab Paper], set the shift width for tab paper.3 Enter the page number where you want sheet insertions, chapterpages, or tab papers to be inserted.❑ Enter the page number where you want the sheet insertion added using - (numerickeys).❑ Press [Paper Select] ➞ select the paper source.IMPORTANT• Select the same sized paper for [Sheet Insertion] (or [Chapter Page]) and [Tab Paper]. If you set[Paper Insertion], select the same sized paper as the front and back covers.• When you select [Front Cover], [Back Cover], [Sheet Insertion] (or [Chapter Page]), if the papersize for one feature is changed to another size, the other two features are changed. However,you may change the paper drawer for one feature without affecting the others, as long as thepaper size is the same.• If you select [Tab Paper], only A4 paper can be used.❑ Select whether to print on the front side, back side, or both sides of the paper.If you set [Chapter Page], or [Tab Paper], you cannot set the side of paper to print on.❑ Press [OK].IMPORTANT• You cannot insert the sheet insertion and chapter page on the first page. Set their positionsstarting from the second page. However, you can insert the tab paper in front of the first cover.• If you select [Copy on Both Sides] for the front cover and tab paper is set to insert in front of thefirst page, the front cover is output first as blank and then the printed tab paper is output.• If you select [Leave Blank] for the sheet insertion, you can set the same page with tab paper. Inthis case, the paper for the sheet insertion is output first and then the tab paper is output.4 Press [Done].
