Collating Copies/Prints 3-433Basic Copying and Mail Box Features● If the optional Saddle Finisher-W2 is attached:❑ Press [Next].❑ Select the stapling type ([Corner], [Double], or [Saddle Stitch]).If you want to select [Corner] or [Double]:• Press [Corner] or [Double] ➞ select the stapling position ➞ press [OK].If you want to select [Saddle Stitch]:• Press [Saddle Stitch] ➞ [Next].• If [Add Cover] is selected, select whether to print on cover ➞ press [Next].• Select the type of paper for the cover ➞ press [Next].Load the paper for the cover into the stack bypass.• Select the paper size ➞ press [OK].IMPORTANT• Make sure to use the same paper size for the cover and the main document.• You can select Heavy 2 paper only if you are not printing on the cover.• Only 64 to 105 g/m2 paper can be used for the main document:• Paper of the following weight can be used as a cover sheet:- If printing on the cover: 64 to 209 g/m2- If not printing on the cover: 64 to 253 g/m2• The orientation to place the side of the paper to use for the cover page in the stack bypassdepends on the type of the paper, as shown below:- Plain, Recycled, Color, Bond, Heavy 1: face up- Heavy 2: face down• If you select [Add Cover], you cannot specify the stack bypass as the paper source used for themain document.3 Press .
