Finisher-X1 3-193Optional EquipmentFinishing ModesThe Finisher-X1 is equipped with the following finishing modes.IMPORTANTThe following types of paper are output to the centre output tray of the main unit and not to the OutputTray of the finisher:- 320 mm x 450 mm (SRA3) paper, envelopes, transparencies, labels, tracing paper, tab paper, glossypaper, and Washi (Japanese paper).NOTEIf the Collate or Group mode is set, the output tray moves downward as the stack of paper that is outputincreases in quantity and thickness. Once the output tray has reached its stacking limit, printing stopstemporarily. Remove all of the prints from the output tray, and printing resumes.■ Collate ModeThe prints are automatically collated into sets arranged in page order. The collated print sets can beshifted by pressing [Offset].■ Group ModeAll prints of the same original page are grouped together. The grouped print sets can be shifted bypressing [Offset].■ Offset ModeThe print output is shifted alternately to the front and back of the tray, in a vertical (portrait) orientation, ora horizontal (landscape) orientation depending on the orientation of your originals.NOTEIf you press [Offset] when either the Collate or Group mode is set, each set of prints is shifted before it isdelivered to the output tray.
