Card Reader-D13-323Optional EquipmentCard Reader-D1If the Card Reader-D1 is attached to the machine, you must insert a control card to operate it.The Card Reader-D1 performs Department ID Management by using the control card.IMPORTANT• If you are using a login service other than the default authentication, the Limit Functions mode will notbe available.• If SSO is set as the login service, you cannot use the optional Card Reader-D1.• If SDL is set as the login service, enter your card number in the card ID field. For more information, seethe MEAP SMS Administrator Guide.NOTE• If the Basic Features screen does not appear on the touch panel display when the control card isinserted, make sure that:- The control card is inserted in the correct direction.- The control card is inserted as far as it can go.- An unusable control card is not inserted. (For example, cards which are damaged or cards prohibitedfrom use.)• Insert a usable control card correctly.• For instructions on turning the power ON, see "Main Power and Control Panel Power," on p. 1-16.• If the Card Reader-C1 is attached, the types of cards shown below can be used. An optical type cardcan manage up to 200 departments, and a magnetic type card can manage up to 1,000 departments.Magnetic Type Card Optical Type Card
