Specifying Device Information Delivery Settings 6-496System Manager SettingsSetting Automatic DeliveryYou can set to automatically deliver device information at a specified time. You can also selectwhich information to deliver.IMPORTANT• When delivering device information, the following machines will not update their information:- Machines which are processing a send job- Machines importing or exporting data via the Remote UI- Machines which are executing functions from the Additional Functions screen• In addition to the above, machines which are having their address books accessed or are sending aprint job will not update their address books, and machines performing a print job will not update theirPrinter Settings.• Machines which could not receive device information because of a power failure or network trouble, willnot receive updated information until the first automatic update after the machine recovers.NOTEDevice information is not delivered if the machine goes into the Shutdown mode, even if an automaticdelivery time is set.1 Press ➞ [System Settings] ➞ [Device Information Delivery Settings]➞ [Auto Delivery Settings] under .2 Select [Everyday], [Select Days], or [Off].● If you select [Everyday]:❑ Select a number ([1] to [5]) ➞ enter the start time using - (numeric keys) ➞ press[Next].
