Specifying Common Settings4-484Customizing Settings1 Press ➞ [Common Settings] ➞ [Stack Bypass Standard Settings].2 Press [On] ➞ [Store].If you press [Off], proceed to step 5.3 Select the desired paper size.● If you want to select a standard paper size:❑ Select the desired paper size ➞ press [Next].NOTETo select an inch paper size, press [Inch-size].● If you want to select an irregular paper size:❑ Press [Irreg. Size].❑ Enter the size of the paper using the numeric keys on the touch panel display.❑ Press [X] ➞ enter a value.❑ Press [Y] ➞ enter a value.❑ Press [OK].You can also select a size key ([S1] to [S5]) containing a stored paper size setting, instead ofentering values.NOTE• To enter values in inches, press [Inch].• For instructions on entering values in inches, see "Values in Inches," on p. 2-28.• If you make a mistake when entering values, press [C] on the touch panel display➞ enter thecorrect values.• To select a registered paper size stored in a size key ([S1] to [S5]), you must store the irregularpaper size in the size key beforehand. For instructions on storing irregular paper sizes, see"Irregular Paper Size Settings for the Stack Bypass," on p. 4-49.❑ Press [Next].
