14-6 Summary of Settings Chapter 14ECM RXRX MODEINCOMING RINGRING COUNTMAN/AUTO SWITCHF/T RING TIMEREMOTE RXREMOTE RX IDMEMORY RXCOLOR RXEnables/disables Error Correction Mode (ECM) duringreception.Selects the receive mode. (1 Chapter 8,ReceivingFaxes)If you select FAX/TEL AUTO SW or DRPD, you canselect additional sub-settings. (1 pp. 8-4, 8-10)When the MultiPASS is set to FAX ONLY MODE orFAX/TEL AUTO SW, enables/disables ringing whenthe MultiPASS receives a call.*Selects the number of incoming rings before theMultiPASS answers.When the MultiPASS is set to MANUAL MODE,determines if the MultiPASS switches to fax receivemode after it rings for a specified time.If you select ON above, selects the length of time theMultiPASS rings before switching to fax receive mode.Enables/disables remote receiving.If you select ON above, selects the remote receiving ID.Enables/disables memory reception of a document (e.g.when an error occurs).Enables/disables color fax reception. (1 p. 8-16)ON/OFFFAX/TEL AUTOSW/FAX ONLY MODE/DRPDOFF/ON2 TIMES(1 to 99)OFF/ON15 SEC(1 to 99)ON/OFF25(00 to 99)ON/OFFON/OFF(Default settings are shown in bold type.)* Even if you have set INCOMING RING to ON, the MultiPASS will only ring if you have connected a telephone oran extension phone to your unit.RX (Reception) Settings MenuFor details on accessing the settings below, (1 p. 14-2).Setting Description Sub-Settings
