Chapter 7 Sending Faxes 7-3Sending Faxesn For black & white sending, set the resolution as follows:1 Make sure the light above is turned off.• If not, press Color/B&W to turn it off.2 Press to select the resolution Ex:setting you want.• You can select from the following:– FAX STANDARDSuitable for most text-only documents.– FAX FINESuitable for fine-print documents.– FAX PHOTOSuitable for documents that contain imagessuch as photos. With this setting, areas ofthe document that contain photos areautomatically scanned with 64 levels of gray,rather than just two (black & white). Thisgives a much better reproduction of photos,though the transmission time is longer.After about 10 seconds, the LCD returns to standby mode.n For color sending, set the resolution as follows:1 Press to turn on its light.2 Press to select the resolution Ex:setting you want.• You can select from the following:– FAX STANDARDProvides standard color resolution.– FAX FINEProvides a higher quality color resolution.After about 10 seconds, the LCD returns to standby mode.nYou can change the resolution setting while the document is being scanned for sending.However, please note that your new setting will only be effective from the next pagescanned.FAX FINEImage Quality/ B&WColorFAX PHOTOImage Quality/ B&WColor
