2-2 Setting Up Chapter 2Choosing a Location for the MultiPASSBefore unpacking your MultiPASS, read the guidelines inImportant Safety Instructions(1 p. 1-7) to make sure you choose a location best suited for the MultiPASS.DimensionsMake sure the location you choose provides enough space around the MultiPASS foradequate ventilation, and to allow paper to flow freely into and out of the unit. Install theMultiPASS approximately 4 inches (10 cm) away from walls and other equipment. Forthe dimensions of the MultiPASS, (1 p. A-2).Unpacking the MultiPASSFollow the directions below to unpack the MultiPASS properly, and to make sure youhave all its components and documentation.nWhen lifting the MultiPASS out of the box, or when you need to move it, lift it from thebottom and hold it firmly and level.Do You Have Everything?As you unpack the MultiPASS, save the carton and packing material in case you wantto move or ship the unit in the future.Carefully remove all items from the box. You should have someone help by holding thebox while you lift the MultiPASS and its protective packaging out of the box.Make sure you have the following documentation as well as the items shown on thenext page:• QUICK START GUIDE• STAND-ALONE FAX MANUAL• CANON CREATIVE CD for MultiPASS C555• LIMITED WARRANTY CARDThe following items are in MultiPASS SUITE SOFTWARE/PRINTER DRIVER CD-ROM:• MultiPASS C555 USER’S GUIDE (This guide)• MultiPASS SUITE FOR WINDOWS SOFTWARE USER’S GUIDE
