Chapter 6 Speed Dialing 6-5Speed DialingUsing One-Touch Speed DialingTo use this feature, you must first register a number for one-touch speed dialing.(1 p. 6-3)Follow this procedure to send documents using one-touch speed dialing:1 Open the document tray.2 Adjust the document feed lever for thedocument you are loading. (2 p. 4-2)3 Prepare the document and load it, facedown, in the ADF. (2 p. 4-3)• For color sending, press Color/B&W to (Currently used memory)turn on its light. (1 p. 7-2)• To adjust the resolution and contrast,(1 pp. 7-2, 7-4). (Standby to scan)4 Press the one-touch speed dialing button Ex:assigned to the number you wish to fax.• The number registered under that one-touchspeed dialing button is displayed.• If you press the wrong button, press Stop,then press the correct button.• If no fax number is assigned to the one-touchspeed dialing button you press, the LCDdisplays NO TEL #. If this happens, makesure you pressed the correct button and thatthe number you want to dial is registeredunder that button.5 Press to begin scanning for sending,or wait a few seconds for the MultiPASS tobegin scanning automatically.• If you prefer the MultiPASS never to scan adocument automatically after a few seconds,disable the TIME OUT setting. (1 p. 14-5)nYou can also use one-touch speed dialing to send a document to more than onedestination at a time. (1 Sequential Broadcasting, p. 7-13)StartTEL=905 795 1111DOCUMENT READYMEMORY USED 0%
