![Canon MultiPASS C70 User Manual Manual pdf 221 page image](https://manuals-archive2.s3.amazonaws.com/4939528/89db08a2c0245dae2d1dcdf1dc2fbcf3221f.jpg)
Chapter 8 Receiving Faxes 8-11Receiving FaxesWhat Happens When Fax/Tel Mode is SelectedYou can select these options in the RX MODE submenu of the RXSETTINGS menu when FAX/TEL AUTO SW is selected. See thefollowing page for details on changing the settings:n You can also set these options from the MultiPASS Desktop Manager.(1 MultiPASS Suite Software User’s Guide)Telephone Fax FaxSending documentmanuallySending documentautomaticallyThe MultiPASS C70 answers without ringing.*The MultiPASS C70 listens for the fax tone.(For 8 sec.)The fax toneis detected.The fax tone is not detected.The document isreceived automatically.The MultiPASS C70 starts ringing. Pick up thehandset to talk.If you don’t pick up the handset(within 22 sec.).DEFAULT ACTIONChoose between:RECEIVE (factory default setting) and DISCONNECT.DISCONNECTRECEIVE(Factory default setting)(The fax tone isdetected and theMultiPASS C70switches to receivemode.)The MultiPASS C70disconnects the call.Not all fax machines are capable of sending a faxtone. For those cases if you set the DEFAULTACTION to RECEIVE, the MultiPASS C70switches to receive mode automatically and startsreceiving the document. If no document comes in,it disconnects after approximately 55 seconds.F/T RING TIME(Factory defaultsetting = 22 sec.)Type of callTelephone chargesbegin for the caller.RING START TIME(Factory defaultsetting = 8 sec.)* Australia only: After answering, the MultiPASS C70 plays “You areconnected. Please hold.”