Chapter 2 Setting Up Your MultiPASS C70 2-29Setting Up YourMultiPASS C70Installing the BJ CartridgeThis section explains how to install the BJ cartridge in the MultiPASSC70 so that you can begin using your unit. For more details on BJcartridges and BJ tanks, refer to BJ Cartridge on page 12-12.n The MultiPASS C70 comes with one BX-20 Black BJ cartridge and oneBC-21e Colour BJ cartridge. The BC-22e Photo BJ cartridge is availableas an option for the MultiPASS C70. For details on purchasing any ofthese cartridges, contact your local authorised Canon dealer.*BJ Cartridge GuidelinesThe most important thing you can do to ensure the best possible printquality, as well as extend the life of your MultiPASS C70, is to take careof the MultiPASS C70’s BJ cartridges following these guidelines:❏ Store BJ cartridges at room temperature.❏ Keep BJ cartridges in their sealed containers until you are ready touse them.❏ Do not shake BJ cartridges vigorously while handling.❏ To change a BJ cartridge, be sure to press the C button (inside theunit) to move the cartridge holder to the centre.❏ Install the BJ cartridge immediately after removing its print headcap and protective tape.❏ Always use the BJ cartridge within one year of unpacking it.❏ When changing BJ cartridges, always store the unused BJ cartridgein the SB-21 BJ cartridge container provided with the MultiPASSC70.❏ Do not remove the BJ cartridge from the MultiPASS C70 unlessnecessary.* The BJ cartridges included with your MultiPASS C70 may vary depending onthe country of purchase.
