11-6 Reports and Lists Chapter 11Transmission (TX) ReportsFor details on enabling or disabling printing of the transmission report,refer to the TX REPORT setting in the REPORT SETTINGS menu.(1 pp. 14-7, 14-8)Error TX ReportThe MultiPASS C70 is set to print a report if an error occurs during sending.This is the default setting for the TX REPORT setting. (1 TX REPORT,pp. 14-7, 14-8)TX ReportYou can change the TX REPORT setting to print a transmission (TX)report for every document you send. (1 TX REPORT, pp. 14-7, 14-8)************************************************* ***TX REPORTTRANSMISSION OKTX/RX NO 0003*CONNECTION TEL 1 432 2060CONNECTION ID Canon OPTICSST. TIME 27/12 14:59USAGE T 00’18PGS. SENT 1RESULT OK27/12 2000 14:59 FAX 123 4567 CANON 001***************************************************************** ***ERROR TX REPORTTX FUNCTION WAS NOT COMPLETEDTX/RX NO 0003*CONNECTION TEL 1 432 2060CONNECTION ID Canon OPTICSST. TIME 27/12 14:59USAGE T 00’00PGS. SENT 0RESULT NG #018 BUSY/NO SIGNAL27/12 2000 14:59 FAX 123 4567 CANON 001* For colour transmissions, the message “:COLOR TX” is printed next to theTX/RX NO.
