1-10 Introducing the MultiPASS C70 Chapter 1Using the MultiPASS C70 With theMultiPASS Desktop Manager for Windows®Canon’s MultiPASS Desktop Manager for Windows® allows you to usethe MultiPASS C70’s faxing, telephone, printing, and scanning functionsdirectly from your PC.For more details on using your MultiPASS C70 with the MultiPASSDesktop Manager, refer to the MultiPASS Suite Software User’s Guide.n The MultiPASS Desktop Manager is designed to operate withWindows ® 95, 98, and NT 4.0.Hardware and Software RequirementsBefore you start, make sure you have the following PC setup. These arethe minimum requirements.❏ IBM® or compatible computer with a Pentium 90 processor or higher.An Intel Pentium processor is recommended.❏ Microsoft Windows® 95, 98, or NT 4.0❏ For Microsoft Windows® NT 4.0, Service Pack 3 or later❏ 32 megabytes (MB) of RAM. 64 MB of RAM is recommended.❏ 60 megabytes (MB) of available hard disk space. 150 MB of availablehard disk space is recommended.❏ CD-ROM drive, or access to one over a network connection❏ 256-colour SVGA monitor or greater❏ Bi-directional shielded IEEE 1284-compatible parallel cable 2 metresin length or shorter. For assistance on purchasing the correct cable,contact your local authorised Canon dealer.
