Chapter 8 Receiving Faxes 8-15Receiving FaxesFollow the procedure below to receive a fax manually:3. When you hear the handset, telephone, or extension phone ring,pick up the handset.If you hear a person’s voice:4. Start your conversation. If the caller wants to send a fax aftertalking to you, ask them to press the start button on their faxmachine. When you hear a slow beep, press Start/Scan on theMultiPASS C70 to begin receiving the fax. Hang up the handset.❏ If the telephone is located away from your unit, dial 25 (theremote receiving ID) on your telephone and hang up.If you hear a slow beep tone or silence:4. Someone is trying to send you a fax.If the telephone is close to your unit, press Start/Scan on theMultiPASS C70. Hang up the handset.❏ If the telephone is located away from your unit, dial 25 (theremote receiving ID) on your telephone and hang up.❏ The MultiPASS C70 begins receiving the fax.n ❏ You can change the number for the remote receiving ID (00 to 99) orturn the feature off. (1 REMOTE RX, pp. 14-11, 14-12)❏ The unit will make a beeping sound if the handset is not hung upproperly. This is called the offhook alarm and can be turned off.(1 OFFHOOK ALARM, pp. 14-5, 14-6)❏ Be sure to hang up the handset after you press the Start/Scan buttonor dial the remote receiving ID for remote receiving; otherwise thecall will be disconnected.❏ If you have an answering machine connected to your MultiPASS C70that can carry out remote-control operations (controlling youranswering machine from a remote telephone), the security code forthis function may be the same as the two-digit ID code describedabove. If so, make sure you change the MultiPASS C70’s two-digit IDcode to make it distinct from the answering machine’s security code.(1 REMOTE RX, pp. 14-11, 14-12)Start / ScanStart / Scan
