12-32 Maintenance Chapter 12Transporting the MultiPASS C70Whenever you plan to transport the MultiPASS C70, you need toprepare it so it will not be damaged during the move.1. DO NOT remove the BJ cartridge from the unit.2. Make sure the cartridge holder is in its home position on the rightside of the unit.❏ If it is not in its home position, press the C button (inside theunit).3. With the cartridge holder on the right side of the unit, tape the BJcartridge and cartridge holder to the side of the unit.4. Disconnect the power cord.5. Disconnect the handset or telephone. Disconnect the extensionphone, answering machine, or modem (if using them). Thendisconnect the telephone line and the parallel cable to the PC.6. Remove the document tray. Then, remove the extension from thedocument tray. (1 p. 2-13)7. Remove the document support. (1 p. 2-12)8. Remove the handset, handset cradle, and cradle support from theMultiPASS C70. (1 Appendix B, Handset)9. Replace all tapes and shipping materials you removed when youfirst unpacked the MultiPASS C70. (1 p. 2-9)10. Pack the MultiPASS C70 and all its components into its originalshipping carton. Use the illustration on page 2-6 for reference.
