9-6 Chapter 9Frequently Asked QuestionsJ Is printing not finishing?If print jobs vanish, it might be that another Windows application is trying touse the same port as the MultiPASS L90. Try selecting the Desktop ManagerSpooling option in the Desktop Manager Setup Options dialog box. Thisaffects only MultiPASS L90 printing.When the MultiPASS L90 memory is being used for such tasks as delayedtransmission, redial, and memory receiving, the MultiPASS L90 cannot use itsmemory for printing.J Does the job not print when using DOS?The MultiPASS L90 printer driver can be used to print documents only inWindows; it cannot print a job in DOS.J Is the document print with undesirable results?You may experience undesirable results when printing a document if you havethe Windows Printing System (or other bi-directional device, such as a latermodel laser printer) installed on your computer and you are attempting to usethe same port on which you also have the MultiPASS L90 connected. Be surethat the MultiPASS L90 is the only device configured to a particular port. TheMultiPASS L90 operates properly only with a dedicated parallel port.Paper Is Not Loading CorrectlyJ Does paper not load into the unit?The paper cassette might contain too many sheets or paper might not beinserted all the way into the cassette.J Does paper not feed through one sheet at a time?Be sure to fan the stack of paper before placing it in the cassette. Make surethe stack of paper does not exceed the paper limit mark. Do not stack morethan 150 sheets in the cassette.