2-5Chapter 2 Installing the Desktop Manager SoftwareYou can choose to proceed with the action, overwriting the settings in theMultiPASS L90. Or, you can cancel the action. By cancelling the action, you canfirst make a record of your settings on the MultiPASS L90. When you resumeoperation in the Desktop Manager, you can reenter the settings recorded foryour MultiPASS L90 in the Desktop Manager.Installing in Windows 3.1xThis section provides instructions for installing the MultiPASS L90 printer driverand Desktop Manager in Windows 3.1x. You can connect the printer driver to theappropriate printer port during installation (for example, LPT1 or LPT2). Youcan later change the connection if necessary.Once you have completed the printer driver installation, you are reminded tocontinue with the installation of the Desktop Manager. When you havecompleted the installation, you must restart Windows so that your system detectsand recognises the newly installed device.To install the printer driver:1. Insert the backup copy of the printer driver diskette in your diskette drive.2. In Program Manager, double-click Control Panel (generally found in theMain group).3. In Control Panel, double-click Printers.4. In the Printers dialog box, click Add. Then click Install.5. In the Install Driver dialog box, specify the drive where you inserted theprinter driver diskette (typically A:\) and click OK.6. In the Add Unlisted or Updated Printer dialog box, click Canon MultiPASSL90 printer and click OK.7. In the Printers dialog box, under Installed Printers, click CanonMultiPASS L90 printer and click Set As Default Printer.8. To exit the Printers dialog box, click Close.