3-5Chapter 3 Printing with the MultiPASS L90Changing the Printer SettingsPrint options consist of settings that determine the type of output for yourdocument. As mentioned earlier, print options are initially installed with defaultsettings, enabling you to print a document immediately. However, you may wantto change the settings.Typically, you would change the printer settings when you print a document. Thefollowing instructions summarise the procedures for changing the printer settings.For detailed information on the specific printer options, refer to later sections inthis chapter.To change the print options:1. Within your Windows application, with your document open, click the printcommand.2. In the print dialog box, display the printer setup or properties dialog box.I If you are using Windows 3.1:Displaying the printer setup varies depending on the application fromwhich you are printing. With some applications, click Printer, then clickOptions.I If you are using Windows 95:Click Properties.3. On the Paper, Graphics, and Setting tabs, specify the printer options youprefer.4. To save your changes and close the dialog box, click OK.To save your changes and leave the dialog box open, click Apply.To close the dialog box without saving your changes, click Cancel.
