VI. MAKING TWO-SIDED/OVERLAY COPIESA. Making Two-Sided/Overlay Copies (1st side)When copying on the first side in two-sided/overlay mode, the delivery deflectingplate is shifted by the delivery paper deflecting solenoid (SL2) to a special feeding path.The paper deflecting plate shifts up when the registration clutch (CL9) turns on.After copying on the first side, the holding tray inlet roller (clockwise) feeds the copypaper to the holding tray.Each time copy paper is fed to the holding tray, the holding tray swinging solenoid(SL9) and the holding tray (X, Y) motor (M8, M9) operate to assist stacking of paper.(See pp. 5-36 and -37.)When the first sheet is stacked on the holding tray, the holding tray re-pick up rolleris rotated to assist stacking. The holding tray is capable of holding as many as 50 sheets.Figure 5-601DC controller PCBJ108A-7Registration paper detection signal (RGPD)J108B-4Fixing assembly outlet paper detectionsignal (FXDEL)J108A-19Fixing assembly inlet paper detectionsignal (FXCJS)J113B-10Holding tray inlet paper sensor (PS15D)J108B-12Delivery paper deflecting solenoiddrive command (DPDSD)J113B-12Internal paper signal (IDPD)J113A-7Holding tray forward clutch drive command (HTFWCD)J113A-6Holding tray reversing clutch drive command (HTRVCD)J113A-5Holding tray re-pick up roller solenoid drive command (HTDSD)SL2M2CL5CL4Pick-uprollerPS12PS47PS52PS15PS23SL6Holding tray inlet rollerHolding tray assemblyHolding tray re-pick up rollerHolding tray feeding assemblyCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-24Download service manual and resetter printer at http://printer1.blogspot.com
