COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 9 INSTALLATION9-12WorkDisconnect the connector, andloosen the screw; then, move thecharging assembly metal fixing inthe direction of the arrow (upperright), and fix it in place with a screw.Remove the primary chargingassembly.Using alcohol, clean the primarycharging assembly.Disconnect the connector, andremove the screw. Then, slide outthe pre-transfer charging assembly.Using alcohol, clean the pre-transfercharging assembly.Disconnect the four connectors, andremove the two screws. (You willremove the drum fixing screw in step12.)Free the harness from the edgesaddle.ConnectorsScrew ScrewDrum fixingscrewScrew Cleaner screwretainer ConnectorScrewPrimarychargingassemblyConnectorCaution:Step91011RemarksDownload service manual and resetter printer at http://printer1.blogspot.com
