2. Adjusting the Height of the Charging WireTable 11-201Reference:You can adjust the height (position) of the primary, transfer/separation charging wireby turning the screw behind the charging assembly. A full turn changes the positionof the charging wire by about 0.7 mm.COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 11 TROUBLESHOOTING11-19Charging assemblyPrimaryPre-transferTransferSeparationHeight of charging wire7.5+1.5-0mm7.5+1.5-0mm9.5+1.0-0mm10.2±0.5mmA:16.2±0.5mm B:14.9±0.5mmA BTolerance±1mmNo adjustingmechanism±2mm±2mmDownload service manual and resetter printer at http://printer1.blogspot.com
