Screen 3-6COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 11 TROUBLESHOOTING11-2206/17ItemSEP-1SEP-DUPSEP-OVLDescriptionUse it to adjust the current (1st side) forthe separation charging assembly. (It ispre-adjusted at the factory; enter thevalue recorded on the service label ifyou have replaced the DC controllerPCB.)Use it to adjust the current (2nd side oftwo-sided) for the separation chargingassembly. (It is pre-adjusted at thefactory; enter the value recorded on theservice label if you have replaced theDC controller PCB.)Use it to adjust the current (2nd side ofoverlay) for the separation chargingassembly. (It is pre-adjusted at thefactory; enter the value on the servicelabel if you have replaced the DCcontroller PCB.)SettingsLabel value ±200Label value ±200Label value ±200RemarksDownload service manual and resetter printer at http://printer1.blogspot.com
