10-3) Study the conversion table for paper codes.Table 9-50611) Check the DIP switch settings.11-1) Shift the DIP switch (SW5-3) on the Copy Data Controller-A1 to OFF.11-2) Press the / key so that the display shows the setting of the DIP switch (SW1,SW5) on the Copy Data Controller-A1.Fig. 9-51911-3) Check the setting of the DIP switch (SW1, SW5) on the Copy Data Controller-A1.(See Table 9-501.)If the setting is not correct, go to 3. “Setting the Board,” and make the correctsetting.If you are setting the Copy Data Interface Board-B1, Copy Data Interface Board-A1, or the Remote Diagnostic Unit-A1 as an option, see the appropriate InstallationProcedure.S1 S5SW1-1SW1-2SW1-3SW1-4SW1-5SW1-6SW5-1SW5-2SW5-3SW5-4SW5-5SW5-6: indicates that the bit is at ON.: indicates that the bit is at OFF.COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 9 INSTALLATION9-53SizeB5FOOLSA4B4A3U SMALL (US)STMTU LARGE (UL)LTRLGLLDR (11 × 7)A5AFOOLSA6FOLIOCOMPUTERU SMALL 2Code123578910111315171819212324Code2526272829333536373839414849505152Sizepostcard (Jpn)U LARGE 2GLTR10 × 8GLGLKLGLOFFICIOEOFFICIOAOFFICIOBOFFICIOALT RALGL12 × 18B3A217 × 2218 × 24Download service manual and resetter printer at http://printer1.blogspot.com
