D. Left Deck Pick-Up Assembly1. Removing the Pick-Up Assembly from the Copier1) Remove the left/right paper deck.2) Slide out the holding tray feeding assembly about 10 cm to the front.3) Remove the mounting screws q from the two positioning pins; then, remove thepositioning pins w, and remove the left deck pick-up assembly e.Figure 5-848When installing the left deck pick-up assembly, slide out the holding tray feedingassembly slightly to the front.Pay attention to the engagement of the gear.2. Removing the Pick-Up Roller1) Remove the left deck pick-up assembly from the copier.2) Remove the stop ring q from the front and the rear; then, remove the pick-up rollerw.Figure 5-849wqwe qqwCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-88Note:Download service manual and resetter printer at http://printer1.blogspot.com
