C. Right Deck Pick-Up Assembly (cassette holder)1. Removing the Pick-Up Assembly from the Copier1) Slide out the paper deck and the cassette of the pick-up assembly which you wantto remove from the copier.2) Open the upper right door and the lower right door.The pick-up assembly cannot be removed if you try to remove it without firstremoving the paper deck and the cassette because of the lifter.3) Remove the mounting screw q, and remove the connector cover w; then,disconnect the two connectors e.4) Remove the two mounting screws r, and remove the pick-up assembly t.Figure 5-8342. Removing the Pick-Up Roller1) Remove the pick-up assembly.2) Remove the two stop rings q on the outside, and remove the pick-up roller w in thedirection of the arrow.Figure 5-835qwq werrtCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-80Caution:Download service manual and resetter printer at http://printer1.blogspot.com
