2. Removing the Lifter Cable1) Remove the paper deck.2) Remove the two mounting screws q above, and loosen the two mounting screws won the side; then, remove the deck front cover e.3) Remove the two mounting screws r inside the deck, and remove the front and rearguide plates t.Figure 5-8214) Mark the position of the latch assembly; then, remove the left and right mountingscrews y (7 in total), and remove the latch assembly u.5) Remove the gear cover i from the front right.Figure 5-822a (left)yuwwrtqeCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-72Download service manual and resetter printer at http://printer1.blogspot.com
